- Notes, cautions, and warnings
- Working on your computer
- Technology and components
- Major components of your system
- Removing and installing components
- BIOS setup
- Troubleshooting
- Getting help
Option | Description |
---|---|
Integrated NIC | Allows you to control the on-board LAN controller.
The option ‘Enable UEFI Network Stack’ is not selected by default.
The options are:
NOTE Depending
on the computer and its installed devices, the items listed in this
section may or may not appear. |
Serial Port | Determines how the built-in serial port operates. Choose any one option:
|
SATA Operation | Allows you to configure the operating mode of the
integrated hard drive controller.
|
Drives | Allows you to enable or disable the various drives
on-board:
|
Smart Reporting | This field controls whether hard drive errors for integrated drives are reported during system startup. The Enable Smart Reporting option is disabled by default. |
USB Configuration | Allows you to enable or disable the integrated
USB controller for:
All the options are enabled by default. |
Front USB Configuration | Allows you to enable or disable the front USB ports. All the ports are enabled by default. |
Rear USB Configuration | Allows you to enable or disable the rear USB ports. All the ports are enabled by default. |
USB PowerShare | This option allows you to charge the external devices, such as mobile phones, music player. This option is enabled by default. |
Audio | Allows you to enable or disable the integrated
audio controller. The option Enable Audio is
selected by default.
Both the options are selected by default. |
Dust Filter Maintenance | Allows you to enable or disable BIOS messages
for maintaining the optional dust filter installed in your computer.
BIOS will generate a pre-boot reminder to clean or replace the dust
filter based on the interval set.
|
Miscellaneous Devices |
|