Removing the 2.5-inch hard drive
cage
About this task
The following images indicate the location of the hard drive
cage and provide a visual representation of the removal procedure.
Steps
- Remove the two (M3x3.5) screws that secure the first hard drive to the hard drive cage.
- Lift the first hard drive out of the hard drive cage.
- Remove the two (M3x3.5) screws that secure the second hard drive to the hard drive cage.
- Lift the second hard drive out of the hard drive cage.
- Lift the hard drive out of the bracket.
NOTE:The orientation or the SATA connector marking on the hard drive so that you can replace it correctly.
Data is not available for the Topic