Installing the M.2230 solid-state drives
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the M.2230 solid-state drives and provides a visual representation of the installation procedure.
NOTE:If you are replacing a M.2 2280 solid-state drive with a M.2 2230 solid-state drive, ensure the M.2 2280 solid-state drive is removed first.
NOTE:The following image indicates the location to install the solid-state drive screw mount based on form factor.
Steps
- Align the notch on the M.2230 solid-state drive with the tab on the M.2 card slot on the system board.
- Slide the M.2230 solid-state drive into the M.2 card slot on the system board.
- Replace the screw (M2x3.5) that secures the M.2230 solid-state drive to the system board.
Data is not available for the Topic