This table lists the operating and storage specifications of your
OptiPlex 7000 Small Form Factor.
Airborne contaminant level: G1 as defined by ISA-S71.04-1985
Table 1. Computer environment
The following table lists the operating and storage environment conditions of OptiPlex 7000 Small Form Factor.
Description
Operating
Storage
Temperature range
10°C – 35°C (50°F – 95°F)
-40°C-65°C (-40°F-149°F)
Relative humidity (maximum)
20% to 80% (non-condensing, Max dew point temperature = 26°C)
5% to 95% (non-condensing, Max dew point temperature = 33°C)
Vibration (maximum)*
0.26 GRMS random at 5 Hz to 350 Hz
1.37 GRMS random at 5 Hz to 350 Hz
Shock (maximum)
Bottom half-sine pulse with a change in velocity of 40.20 cm/sec (20 in./sec)
105G half-sine pulse with a change in velocity of 105.20 cm/sec (52.5 in./sec)
Altitude range
-15.2 m to 3048 m (-49 ft to 10,000 ft)
-15.2 m to 10,668 m (-49 ft to 35,000 ft)
CAUTION: Operating and storage temperature ranges may differ among components, so operating or storing the device outside these ranges may impact the performance of specific components.
* Measured using a random vibration spectrum that simulates user environment.
† Measured using a 2 ms half-sine pulse.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\