Installing internal antenna
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the internal antenna and provide a visual representation of the installation procedure.
![Installing internal antenna](https://dl.dell.com/content/guides/public/Html/opti7000mt_sm/images/GUID-17531C82-70A4-4761-B25D-0CF42E8BB5AA-low.jpg)
Steps
- Insert the main-antenna into the ANT-W slot and auxiliary-antenna into the ANT-B slot.
NOTE:Applies if you are upgrading the system that did not have these optional modules.
- Route the antennas using the routing guides and insert the antenna cables through the hole that is provided in the system chassis.
- Replace the two screws to secure the main and auxiliary antennas to the system chassis.
- Connect the antenna cables to the WLAN card.
The following table provides the antenna-cable color scheme:
Table 1. Antenna-cable color schemeThe table provides the antenna-cable color scheme for the WLAN card:
Connectors on the wireless card
| Antenna-cable color
|
---|
Main (white triangle)
| White
|
Auxiliary (black triangle)
| Black
|
Data is not available for the Topic