Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

OptiPlex 5480 All-In-One Setup and Specifications

Display

Table 1. Display specifications

The following table provides the detailed display specifications of OptiPlex 5480 All-in-One.

Description Values for touch display Values for non-touch display
Type

Full High Definition (FHD)

Full High Definition (FHD)

Panel technology

Wide Viewing Angle (WVA)/In-Plane Switching (IPS)

Wide Viewing Angle (WVA)/In-Plane Switching (IPS)

Luminance
  • 250 Nits (typical)
  • 200 Nits (minimum)
  • 250 Nits (typical)
  • 200 Nits (minimum)
Dimensions (Active area):
Height

296.46 mm (11.67 in.)

296.46 mm (11.67 in.)

Width

527.04 mm (20.75 in.)

527.04 mm (20.75 in.)

Diagonal

604.70 mm (23.81 in.)

604.70 mm (23.81 in.)

Native resolution

1920 x 1080

1920 x 1080

Megapixels

16.7 million colors

16.7 million colors

Color gamut

72% NTSC typical

72% NTSC typical

Pixels per inch (PPI)

92

92

Contrast ratio (min)
  • 700:01:00 (minimum)
  • 1000:01:00 (typical)
  • 700:01:00 (minimum)
  • 1000:01:00 (typical)
Response time (max)
  • 25 ms (maximum)
  • 14 ms (typical)
  • 25 ms (maximum)
  • 14 ms (typical)
Refresh rate

60 Hz

60 Hz

Horizontal view angle
  • 170 +/-degrees (minimum)
  • 178 +/-degrees (typical)
  • 170 +/-degrees (minimum)
  • 178 +/-degrees (typical)
Vertical view angle
  • 170 +/-degrees (minimum)
  • 178 +/-degrees (typical)
  • 170 +/-degrees (minimum)
  • 178 +/-degrees (typical)
Pixel pitch

0.2745 x 0.2745 mm

0.2745 x 0.2745 mm

Power consumption (maximum)

13.48 W

13.48 W

Anti-glare vs glossy finish

Anti-glare

Anti-glare


  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\