Removing the
SD card reader
NOTE:Depending on the configuration you order, you
may see either of the heat sinks as shown in the
image below.
![Heat sink](https://dl.dell.com/content/guides/public/Html/optiplex-3050-desktop-sff-om/images/GUID-155BEAB3-751D-48E2-AA52-49A4EEA438EF-low.jpg)
- Follow the procedure in Before working inside
your computer.
- Remove the:
- cover
- bezel
- hard drive and optical drive module
- M.2 PCIe SSD
- To remove the SD card reader:
- Release the power supply unit cables from
the retention clips on the SD card reader enclosure [1].
- Remove the screws that secure the SD card
reader and lift it away from the computer [2] [3].
Data is not available for the Topic