Removing the I/O cable
About this task
The following image indicates the location of the I/O cable and provides a visual representation of the removal procedure.
![Image: Removing the screws that secure the base cover to the palm-rest and keyboard assembly](https://dl.dell.com/content/guides/public/Html/latitude-3530-service-manual/images/GUID-08C7A484-E68A-4E92-B722-0DEB95790929-low.jpg)
Steps
- Peel the adhesive tape, open the latch and disconnect the I/O cable from the connector on the system board.
- Peel the adhesive tape and unroute the I/O cable from the routing guides in the palmrest assembly.
- Peel the adhesive tape, open the latch and disconnect the I/O cable from the connector on the I/O board.
- Lift and remove the I/O cable from the palmrest assembly.
Data is not available for the Topic