Installing the speaker
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the speakers and provides a visual representation of the installation procedure.
![Image: Removing the screws that secure the base cover to the palm-rest and keyboard assembly](https://dl.dell.com/content/guides/public/Html/latitude-3530-service-manual/images/GUID-13754F93-B835-49BF-84C5-04ED095E80CF-low.jpg)
Steps
- Align and place the speakers into the slot on the palmrest assembly.
- Route the speaker cable through the routing guides in the palmrest assembly.
- Connect the speaker cable to the connector on the system board.
- Affix the adhesive tapes to secure the speakers in place.
Data is not available for the Topic