Removing the display assembly
About this task
The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.
![Image: Removing the screws that secure the base cover to the palm-rest and keyboard assembly](https://dl.dell.com/content/guides/public/Html/latitude-3530-service-manual/images/GUID-28202C48-A9F6-4C81-BA20-E67C15F7B40F-low.jpg)
![Image: Removing the screws that secure the base cover to the palm-rest and keyboard assembly](https://dl.dell.com/content/guides/public/Html/latitude-3530-service-manual/images/GUID-21F54EA9-AB11-40A0-9CC6-5AD111A21DB5-low.jpg)
![Image: Removing the screws that secure the base cover to the palm-rest and keyboard assembly](https://dl.dell.com/content/guides/public/Html/latitude-3530-service-manual/images/GUID-4FD5CC7A-83B0-4C23-B4FE-E9DD7FC71DD5-low.jpg)
Steps
- Unroute the display cable from the routing guides in the palmrest assembly.
- Peel the adhesive tape that secures the display cable in place.
- Open the latch and disconnect the display cable from the connector on the system board.
- Remove the
(M2.5x4) and six (M2.5x5) screws
that secure the display hinges to the system.
- Lift the left and right hinges in upward direction away from the palmrest assembly.
- Lift the palmrest assembly off the display assembly.
Data is not available for the Topic