Installing the USB cable
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the USB cable and provides a visual representation of the installation procedure.
![Image: Installing the USB cable](https://dl.dell.com/content/guides/public/Html/latitude-3530-service-manual/images/GUID-81694CE0-E0FE-4962-B8CC-DB7E9B015D03-low.jpg)
Steps
- Connect the USB cable to the connector on the system board and close the latch.
- Align and adhere the USB cable on the palmrest assembly.
- Connect the USB cable to the connector on the I/O board and close the latch.
Data is not available for the Topic