Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Latitude 3530 Service Manual

PDF

Installing the WLAN card

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the WLAN card and provides a visual representation of the installation procedure.

Image: Removing the screws that secure the base cover to the palm-rest and keyboard assembly

Steps

  1. Connect the two antenna cables to the connectors on the WLAN card.
    NOTE:The antenna cable connectors are fragile and utmost care should be taken while replacing them.
    Table 1. Antenna cable guideAntenna cable guide
    Cable color Connector
    White cable (Main) White triangle (△) on the WLAN module of the system board
    Black cable (Aux) Solid triangle (▲) on the WLAN module of the system board
  2. Align the notch on the WLAN card with the tab on the WLAN card slot.
  3. Slide the WLAN card at an angle into the WLAN card slot.
  4. Align and place the WLAN card bracket on the WLAN card.
  5. Install the screw (M2x3) to secure the WLAN card bracket on the WLAN card to the system board.

Next steps

  1. Install the base cover.
  2. Exit the service mode
  3. Install the SIM card tray for 4G LTE enabled systems.
  4. Install the microSD-card.
  5. Follow the procedure in after working inside your computer.
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\