Installing keyboard assembly
NOTE The keyboard and the keyboard tray together are called the keyboard assembly.
NOTE The keyboard has multiple snap points on the lattice side which must be pushed down firmly at the snap points in order to secure and fit it to the replacement keyboard.
-
Align the keyboard assembly with the screw holders on the computer.
-
Tighten the M2.0 x 2.5 screws that secure the keyboard to the chassis.
-
Connect the keyboard cable, USH board cable (optional), keyboard backlight cable, and touchpad cable to the connectors on the touchpad buttons board.
-
Install the
system board.
-
Install the
heat sink.
-
Install the
WLAN card.
-
Install the
WWAN card.
-
Install the
PCIe SSD card.
-
Install the
memory module.
-
Connect the battery cable to the connector on the system board.
-
Install the
base cover.
-
Follow the procedure in
After working inside your computer.