Table 1. Power ManagementThe table describes the power management options.
Option
Description
Lid Switch
Allows you to enable or disable the lid switch from
automatically turning on / off the screen when the lid is closed.
AC Behavior
Allows you to enable or disable the computer from
turning on automatically when an AC adapter is connected.
Wake on AC
This option is not set by default.
Auto On Time
Allows you to set the time at which the computer must
turn on automatically.
The options are:
Disabled—Default
Every Day
Weekdays
Select Days
This option is not set by default.
USB Wake Support
Allows you to enable USB devices to wake the system
from standby.
Enable USB Wake Support
Wake on Dell USB-C Dock
This option is not set by default.
Wireless Radio Control
This option if enabled, will sense the connection of the system to a wired network and subsequently disable the selected wireless radios (WLAN and/or WWAN). Upon disconnection from the wired network the selected wireless radio will ne enabled.
Control WLAN radio
Control WWAN radio
This option is not set by default.
Wake on LAN
This option allows the computer to power up from
the off state when triggered by a special LAN signal. Wake-up from
the Standby state is unaffected by this setting and must be enabled
in the operating system. This feature only works when the computer
is connected to AC power supply.
Disabled—Default - Does not allow the system to power
on by special LAN signals when it receives a wake-up signal from the
LAN or wireless LAN.
LAN Only - Allows the system to be powered
on by special LAN signals.
WLAN Only - Allows the system to be powered
on by special WLAN signals.
LAN or WLAN - Allows the system to be powered
on by special LAN or WLAN signals.
Peak Shift
Allows you enable of disable the Peak shift feature. This feature when enabled minimizes the AC power usage at times of peak demand. Battery doesnot charge between the Peak Shift start and end time
Peak Shift Start and End Time can be configured for all weekdays
This option set the battery threshold value (15 % to 100 %)
Advanced Battery Charge Configuration
This option enables you to maximize the battery health.
By enabling this option, your system uses the standard charging algorithm
and other techniques, during the non-work hours to improve the battery
health.
Advanced Battery Charge Mode can be configured for all weekdays
Battery #1 Charge Configuration
Allows you to select the charging mode for the battery.
The options are:
Adaptive—Default
Standard - Fully charges your battery at a standard
rate.
ExpressCharge- The battery charges over a shorter
period of time using Dell’s fast charging technology.
Primarily AC use
Custom
If Custom Charge is selected, you can also configure Custom Charge
Start and Custom Charge Stop.
NOTE:All charging mode may
not be available for all the batteries.
Battery #2 Charge Configuration
Type-C connector Power
This option allows you to set maximum power that can be drawn from the Type-C connector.
The options are:
7.5 Watts—Default
15 Watts
Power Usage Mode
This field lets you choose the system power usage mode.
The options are:
Power Saver
Balanced — Default.
High Performance
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\