Latitude 3490 Owner’s Manual

Installing the eDP and camera cable

1. Route the display cable through its routing channel and secure the display cable to the LCD back cover with the adhesive tapes.
2. Connect the camera cable to its connector on the LCD back cover.
3. Replace the 5 M2.5x2.5 screws to secure the left hinge bracket to the LCD back cover.
4. Secure the eDP cable to the LCD back cover with adhesive tapes.
5. Install the:
   1. LCD panel
   2. LCD bezel
   3. display hinge cover
   4. display assembly
   5. WWAN
   6. Installing the WLAN card
   7. hard drive
   8. battery
   9. base cover
6. Follow the procedure in After working inside your computer