Installing the SIM card tray
Prerequisites
If you are replacing a component, remove the necessary component before the installation procedure.
About this task
NOTE: The following steps are applicable only for 4G LTE enabled computer.
The following image provides a visual representation of the SIM card tray installation procedure.
![Image: Removing the screws that secure the base cover to the palm-rest and keyboard assembly](https://dl.dell.com/content/guides/public/Html/latitude-3430-service-manual/images/GUID-630EC85E-3D5C-4A5C-84C8-D046A0F8631A-low.jpg)
Steps
- Insert the SIM card removal pin into the release hole to remove the SIM card tray.
- Push the pin to disengage the lock, and eject the SIM card tray.
- Slide the SIM card tray out of the slot on the computer.
- Align and place the MicroSIM-card in the dedicated slot on the SIM card tray.
- Slide the SIM card tray back into the slot on the computer.
Data is not available for the Topic