NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 1. Screw listThe following table shows the screw list and the images of the screws.
Component
Screw type
Quantity
Image
Base cover
Captive screws
M2x7.5
M2x7
2
6
M.2 Solid-state drive bracket
M2x3
1
M.2 Solid-state drive conversion bracket
M2x3
1
M.2 Solid-state drive conversion plate
M2x3
2
Hard disk-drive module
M2X4.5
4
Hard disk-drive
M3x3
4
WLAN card
M2x3
1
WWAN card
M2x3
1
System Fan
M2x3
2
3-cell battery
M2x3
3
4-cell battery
M2x3
4
Display hinges
M2.5x6
M2.5x4
3
2
Hinge bracket
M2.5x3
8
Heatsink assembly
Captive screws
4
Power adapter port
M2x3
1
Ethernet port
M2x5
1
I/O board
M2x3
2
Type-C bracket
M2x5
2
System board
M2x2
2
Touchpad bracket
M2x2.5
3
Touchpad module
M2x2
4
WWAN I/O board
M2x3
2
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\