Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Latitude 3430 Service Manual

Removing the USB cable

Prerequisites

  1. Follow the procedure in before working inside your computer.
  2. Remove the microSD-card.
  3. Remove the SIM card tray for 4G LTE enabled systems.
  4. Remove the base cover.
  5. Remove the battery.
  6. Remove the hard-disk drive.
  7. Remove the WWAN card for 4G LTE enabled systems.

About this task

The following image indicates the location of the USB cable and provides a visual representation of the removal procedure.

Image: Removing the USB cable

Steps

  1. Open the latch and disconnect the USB cable from the connector on the system board.
  2. Carefully peel the USB cable from the palmrest assembly.
  3. Open the latch and disconnect the USB cable from the connector on the I/O board.
  4. Lift and remove the USB cable from the palmrest assembly.

  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\