Removing the speaker
About this task
The following image indicates the location of the speakers and provides a visual representation of the removal procedure.
![Image: Removing the screws that secure the base cover to the palm-rest and keyboard assembly](https://dl.dell.com/content/guides/public/Html/latitude-3430-service-manual/images/GUID-BAB2FF6C-D17D-457D-A4C7-ACE687582E97-low.jpg)
Steps
- Disconnect the hard-disk drive cable from the connector on the system board.
- Open the latch and disconnect the touchpad cable, keyboard cable, keyboard backlit LED cable, and USB cable from the connectors on the system board.
- Disconnect the speaker cable from the connector on the system board.
- Unroute the speaker cable from the routing guides in the palmrest assembly.
- Peel the adhesive tapes, lift and remove the speakers off the palmrest assembly.
Data is not available for the Topic