Removing the power adapter port
About this task
The following image indicates the location of the power adapter port and provides a visual representation of the removal procedure.
![Image: Removing the screws that secure the base cover to the palm-rest and keyboard assembly](https://dl.dell.com/content/guides/public/Html/latitude-3430-service-manual/images/GUID-1A0E517B-E907-4FD6-B025-2822EF067ACB-low.jpg)
Steps
- Remove the
(M2.5x6) and (M2.5x4) screws that secure the display hinges to the system.
- Disconnect the power adapter port from the connector on the system board.
- Remove the (M2x3) screw that secures the power adapter port to the palmrest assembly.
- Lift and remove the power adapter port from the palmrest assembly.
Data is not available for the Topic