Installing the speaker
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the speakers and provides a visual representation of the installation procedure.
![Image: Removing the screws that secure the base cover to the palm-rest and keyboard assembly](https://dl.dell.com/content/guides/public/Html/latitude-3430-service-manual/images/GUID-F65A1C36-E7EC-44D9-A36D-50F7AA517D58-low.jpg)
Steps
- Align and place the speakers into the slot on the palmrest assembly.
- Route the speaker cable through the routing guides in the palmrest assembly.
- Connect the speaker cable to the connector on the system board.
- Affix the adhesive tapes to secure the speakers in place.
- Connect the hard-disk drive cable to the connector on the system board.
- Connect the touchpad cable, keyboard cable, keyboard backlit LED cable, and USB cable to the connectors on the system board and close the latches.
Data is not available for the Topic