Installing the camera
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the camera and provides a visual representation of the installation procedure.
Steps
- Align and place the camera module into the slot on the display back-cover.
- Connect the camera cable to the connector on the camera module.
- Affix the adhesive tape to secure the camera cable to the connector on the camera module.
- Align and affix the camera cable on the display back-cover.
- Align and place the camera bracket that secures the camera to the display back-cover.
Data is not available for the Topic