Removing the heatsink assembly
About this task
The following images indicate the location of the heatsink assembly and provide a visual representation of the removal procedure.
![Image: Removing the screws that secure the base cover to the palm-rest and keyboard assembly](https://dl.dell.com/content/guides/public/Html/latitude-3430-service-manual/images/GUID-9B1818EE-D84B-4955-928E-883A519D3641-low.jpg)
Steps
- Peel the tape that secures the antenna cables to the heatsink assembly.
- In reverse sequential order, loosen the four captive screws (4->3->2->1) that secure the heatsink assembly to the system board.
- Peel the tape that secures the heatsink assembly to the system board.
- Lift the heatsink assembly off the system board.
Data is not available for the Topic