Removing the hard-disk drive bracket
About this task
The following image indicates the location of the hard-disk drive bracket and provides a visual representation of the removal procedure.
![Image: Removing the screws that secure the base cover to the palm-rest and keyboard assembly](https://dl.dell.com/content/guides/public/Html/latitude-3430-service-manual/images/GUID-3348507D-2E54-47F7-8929-FB8E12B5B9C5-low.jpg)
Steps
- Disconnect the hard-disk drive cable from the connector on the hard-disk drive bracket.
- Remove the four (M3x3) screws that secure the hard-disk drive to the hard-disk drive bracket.
- Flip the hard-disk drive bracket, lift the silver foil, and remove the hard-disk drive from the hard-disk drive bracket.
Data is not available for the Topic