Removing the WWAN card
About this task
The following image indicates the location of the WWAN card and provides a visual representation of the removal procedure.
NOTE: The following steps are applicable only for 4G LTE enabled systems.
![Removing the heat sink](https://dl.dell.com/content/guides/public/Html/latitude-3430-service-manual/images/GUID-5CA3251C-EADE-4530-B8F5-5BDD708795A0-low.jpg)
Steps
- Open the mylar sheet that covers the WWAN card.
- Remove the screw (M2x3) that secures WWAN card bracket to the WWAN card on the system board.
- Lift and remove the WWAN card bracket from the WWAN card that secures the two antenna cables.
- Disconnect the antenna cables from the connectors on the WWAN card.
- Disconnect and remove the WWAN card from the WWAN card slot.
Data is not available for the Topic