Removing the touchpad
About this task
The following image indicates the location of the touchpad and provides a visual representation of the removal procedure.
Steps
- Open the latch and disconnect the touchpad cable from the connector on the system board.
- Peel the adhesive tapes that secure the touchpad module in place.
- Remove the three (M2x2.5) screws that secure the touchpad bracket to the touchpad module.
- Lift and remove the touchpad bracket from the touchpad module.
- Remove the four (M2x2) screws that secure the touchpad module to the palmrest assembly.
- Lift and remove the touchpad module from the palmrest assembly.
Data is not available for the Topic