Removing the 4-cell battery
About this task
The following image indicates the location of the battery and provides a visual representation of the removal procedure.
![Removing the heat sink](https://dl.dell.com/content/guides/public/Html/latitude_3420_sm_discrete/images/GUID-529AFCF2-3369-4CD3-8701-A5F551C20897-low.jpg)
Steps
- Disconnect the battery cable from the connector on the system board.
- Remove the four (M2X3) screws that secure the battery in place.
- Lift and remove the battery from the palmrest assembly.
- Slide the metal above the connector on the battery to unlock.
- Peel the adhesive tapes and unroute the battery cable from routing channel in the battery.
- Disconnect the battery cable from the connector on the battery.
Data is not available for the Topic