Installing the USB cable
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the USB cable and provides a visual representation of the installation procedure.
![](https://dl.dell.com/content/guides/public/Html/latitude_3420_sm_discrete/images/GUID-E0D6E8DC-67C1-4FE2-9390-8F45A3D994FE-low.jpg)
Steps
- Connect the USB cable to the connector on the system board and close the latch.
- Align and adhere the USB cable on the palmrest assembly.
- Connect the USB cable to the connector on the I/O board and close the latch.
Data is not available for the Topic