Installing the camera
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the camera and provides a visual representation of the installation procedure.
![Image: Removing the screws that secure the base cover to the palm-rest and keyboard assembly](https://dl.dell.com/content/guides/public/Html/latitude_3420_sm_discrete/images/GUID-47F6AE15-8C0B-49E4-AEF8-957C31C39882-low.jpg)
Steps
- Align and place the camera module into the slot on the display back-cover.
- Connect the camera cable to the connector on the camera module.
- Affix the adhesive tape to secure the camera cable to the connector on the camera module.
- Align and affix the camera cable on the display back-cover.
Data is not available for the Topic