Removing the display assembly
About this task
The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.
![Image: Removing the screws that secure the base cover to the palm-rest and keyboard assembly](https://dl.dell.com/content/guides/public/Html/latitude_3420_sm_discrete/images/GUID-2C8FE6AF-538A-4345-85F9-C8FAD91DF23F-low.jpg)
![Image: Removing the screws that secure the base cover to the palm-rest and keyboard assembly](https://dl.dell.com/content/guides/public/Html/latitude_3420_sm_discrete/images/GUID-21A78A97-1F00-40C6-AAB9-80529745E99C-low.jpg)
![Image: Removing the screws that secure the base cover to the palm-rest and keyboard assembly](https://dl.dell.com/content/guides/public/Html/latitude_3420_sm_discrete/images/GUID-268F845A-6206-49FF-B6F5-50394C7F7642-low.jpg)
Steps
- Unroute the display cable from the routing guides in the palmrest assembly.
- Peel the adhesive tape that secures the display cable in place.
- Open the latch and disconnect the display cable from the connector on the system board.
- Remove the
three (M2.5x6) and two (M2.5x4) screws that secure the display hinges to the system.
- Lift the left and right hinges in upward direction away from the palmrest assembly.
- Lift the palmrest assembly off the display assembly.
Data is not available for the Topic