Installing the display cable
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the display cable and provides a visual representation of the installation procedure.
![Image: Removing the screws that secure the base cover to the palm-rest and keyboard assembly](https://dl.dell.com/content/guides/public/Html/latitude_3420_sm_discrete/images/GUID-679B3876-8F1D-42B8-A8C3-FB76E889C036-low.jpg)
Steps
- Connect the display cable from the connector on the camera module.
- Connect the display cable from the connector on the display panel.
- Connect the display cable from the connector on the system board.
Data is not available for the Topic