Replacing the battery cable
If you are replacing a component, remove the existing component before performing the installation procedure.
The following image indicates the location of the battery cable and provides a visual representation of the installation procedure.
![Replacing the battery cable](https://dl.dell.com/content/guides/public/Html/lat7300_service_manual/images/GUID-EC053E08-213A-4D15-AF45-3B1DB3EDE8CE-low.jpg)
- Align and place the battery cable on the battery.
- Route the battery cable through the routing guides on the battery.
- Connect the battery cable to the connector on the battery.
- Adhere the tape to secure the battery cable to the battery.
Data is not available for the Topic