Latitude 3380 Owner's Manual

Installing the system board

1. Align the system board with the screw holders on the computer.
2. Tighten the M2xL3 screws to secure the system board to the computer.
3. Connect the audio board; audio board cable tape, speaker cable, HDD cable, touchpad cable, coin cell battery cable, and the keyboard cables to their respective connectors.
4. Connect the display cable to the connector.
5. Place the metal bracket over the connector and tighten the M2xL3 screw to secure the display cable to the computer.
6. Install the:
   1. DCin
   2. fan
   3. heat sink
   4. memory module
   5. WLAN card
   6. battery
   7. base cover
   8. microSD card
7. Follow the procedure in After working inside your computer.