Allows you to set, change, or delete the administrator
(admin) password.
NOTE You must set the admin password before you set the system or hard
drive password. Deleting the admin password automatically deletes
the system password and the hard drive password.
NOTE Successful password
changes take effect immediately.
Default setting:
Not set
System Password
Allows you to set, change, or delete the system password.
NOTE Successful password
changes take effect immediately.
Default setting:
Not set
Internal HDD-0 Password
Allows you to set, change, or delete the administrator
password.
NOTE Successful
password changes take effect immediately.
Default
setting: Not set
Strong Password
Allows you to enforce the option to always set strong
passwords.
Default Setting: Enable Strong Password
is not selected.
NOTE If Strong Password is enabled, the Admin and System passwords must
contain at least one uppercase character, one lowercase character
and be at least eight characters long.
Password Configuration
Allows you to specify the minimum and max password
lengths of the Administrator and System passwords.
min-4—by default, if
you want to change you can increase the number.
max-32—you can decrease
the number.
Password Bypass
Allows you to enable or disable the permission to
bypass the System and the Internal HDD password, when they are set.
The options are:
Disabled
—enabled by default
Reboot bypass
Password Change
Allows you to enable the disable permission to the
System and Hard Drive passwords when the admin password is set.
Default setting: Allow Non-Admin Password Changes is selected.
Non-Admin Setup Changes
Allows you to determine whether changes to the setup
options are allowed when an Administrator Password is set. If disabled,
the setup options are locked by the admin password.
Option "allow wireless switch changes" is not selected by default.
UEFI Capsule Firmware Updates
Allows you to enable or disable. This option controls
whether this system allows BIOS updated via UEFI capsule update packages.
The options are:
Enable UEFI Capsule Firmware—enabled by default
TPM 2.0 Security
Allows you to enable the Trusted Platform Module (TPM)
during POST. The options are:
TPM On—enabled
by default
Clear
PPI Bypass
for Enable Commands—enabled by default
PPI Bypass
for Disabled Commands
Attestation enable—enabled
by default
Key storage enable—enabled
by default
SHA-256—enabled by default
Disabled
Enabled—enabled
by default
NOTE To upgrade
or downgrade TPM 2.0, download the TPM wrapper tool—software.
Computrace
Allows you to activate or disable the optional Computrace
software The options are:
Deactivate
Disable
Activate—enabled
by default
NOTE The Activate
and Disable options will permanently activate or disable the feature
and no further changes will be allowed.
CPU XD Support
Allows you to enable the Execute Disable mode of the
processor.
Enable CPU XD Support—enabled by default
Admin Setup Lockout
Allows you to prevent users from entering Setup when
an Administrator password is set.
Default Setting:
This option is enabled
Master password lockout
This option is not enabled by default
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\