Removing speaker
- Follow the procedure in Before working inside
your computer.
- Remove the:
- microSD card
- base cover
- battery
- To remove the speaker:
- Disconnect the speaker cable from the connector on the system
board [1].
- Lift the speaker cable off from the cable
guide [2].
- Remove the adhesive tape that secures the
speaker cable to the computer [3].
NOTE Speakers are held down with adhesive tape as well as rubber grommets. The rubber grommets will come up with the speaker assembly.
- Unroute the speaker cable from the routing channel [4].
- Remove the speakers from the computer.
Data is not available for the Topic