Installing the
system board
- Align the system board with the screw holders on the computer.
- Tighten the M2xL3 screws to secure the system board to the computer.
- Connect the audio board; audio board cable tape, speaker
cable, HDD cable, touchpad cable, coin cell battery cable, and the keyboard cables to their
respective connectors.
- Connect the display cable to the connector.
- Place the metal bracket over the connector
and tighten the M2xL3 screw to secure the display cable to the computer.
- Install the:
- DCin
- fan
- heat sink
- memory module
- WLAN card
- battery
- base cover
- microSD card
- Follow the procedure in After working inside
your computer.
Data is not available for the Topic