Installing the speaker
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the speaker and provides a visual representation of the installation procedure.
![Installing the speaker](https://dl.dell.com/content/guides/public/Html/lat3120_sm/images/GUID-93206A94-3E85-4DF6-8C43-316FEF6B7ABC-low.jpg)
Steps
- Using the alignment posts and rubber grommets, replace the speaker into the slots on the computer chassis.
- Route the speaker cable through the routing channel.
- Affix the adhesive tapes to secure the speaker cable on the system board.
- Connect the speaker cable to the connector on the system board.
Data is not available for the Topic