Removing the dummy battery cell
About this task
NOTE The following steps are for the systems that are shipped with a 3-cell battery.
The following image indicates the location of the dummy battery cell and provides a visual representation of the removal procedure.
![Removing the solid-state drive](https://dl.dell.com/content/guides/public/Html/lat3120_sm/images/GUID-0884EFC8-6920-44EE-B878-D79C39FA2980-low.jpg)
Steps
- Peel off the adhesive tapes that secure the battery cable to the dummy battery cell.
- Remove the two screws (M2x3) that secure the dummy battery cell to the system board.
- Disconnect the battery cable from the system board.
- Lift and remove the dummy battery cell from the computer chassis.
Data is not available for the Topic