Removing the display cable
About this task
The following image indicates the location of the display cable and provides a visual representation of the removal procedure.
![Connect the cables onto the system board.](https://dl.dell.com/content/guides/public/Html/lat3120_sm/images/GUID-A7F42680-1669-4E14-AEF5-D6E4700D6726-low.jpg)
Steps
- Peel off the tape that secures the display connector on the front-facing camera module.
- Disconnect the display cable to the front-facing camera module.
- Peel off the tape from the left hinge that secures the display cable.
- Unroute the display cable from the routing channel on the bottom-left side of the display cover.
- Peel off the display cable from the display cover.
Data is not available for the Topic