Latitude 3120/Latitude 3120 2-in-1 Service Manual

Removing the display cable

Prerequisites

Follow the procedure in before working inside your computer.
Remove the palmrest and keyboard assembly.
Remove the display assembly.
Remove the display bezel.
Remove the display panel.

About this task

The following image indicates the location of the display cable and provides a visual representation of the removal procedure.

Connect the cables onto the system board.

Steps

Peel off the tape that secures the display connector on the front-facing camera module.
Disconnect the display cable to the front-facing camera module.
Peel off the tape from the left hinge that secures the display cable.
Unroute the display cable from the routing channel on the bottom-left side of the display cover.
Peel off the display cable from the display cover.