Removing the display bezel
Prerequisites
NOTE The following steps are for Latitude 3120 systems.
About this task
The following images indicate the location of the display bezel and provide a visual representation of the removal procedure.
![Connect the cables onto the system board.](https://dl.dell.com/content/guides/public/Html/lat3120_sm/images/GUID-EF8FB96F-E730-48F7-AAF6-59276064267B-low.jpg)
![Install the system board and tighten the screws.](https://dl.dell.com/content/guides/public/Html/lat3120_sm/images/GUID-B61441B3-0348-4FB3-A44D-272BB6BD7D9D-low.jpg)
Steps
NOTE The bezel screws are covered with disposable cosmetic mylar stickers that must not be peeled off before bezel screw removal.
Remove the four screws (M2.5x3.8) that secure the display bezel on the display assembly.
- Use a plastic scribe to carefully pry open the recesses near the left and right hinges on the bottom edge of the display bezel.
- Use the scribe to pry open the top, left, and right sides of the display bezel.
- Lift and remove the display bezel from the display assembly.
Data is not available for the Topic