Installing the front facing camera
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the front-facing camera, and provides a visual representation of the installation procedure.
![Installing the heatsink assembly](https://dl.dell.com/content/guides/public/Html/lat3120_sm/images/GUID-7F1C883C-4389-4865-83A2-E2E79DBCCFE2-low.jpg)
Steps
- Insert the front-facing camera module into the slot on the display cover.
- Connect the display cable to the front-facing camera module.
- Affix the adhesive tape to secure the display connector on the front-facing camera module.
Data is not available for the Topic