Removing the power-adapter port
The following image indicates the location of the power-adapter port and provides a visual representation of the removal procedure.
![Image: Removing the power-adapter port](https://dl.dell.com/content/guides/public/Html/inspiron-7706-2n1-service-manual/images/GUID-5D9B22CA-2674-469D-A3B9-F9E6092C4515-low.jpg)
- Remove the three screws (M2.5x4.5) that secure the right display-hinge to the palm-rest and keyboard assembly.
- Open the right display-hinge at an angle of 90 degrees.
- Remove the screw (M2x3.5) that secures the power-adapter port to the palm-rest and keyboard assembly.
- Disconnect the power-adapter port cable from the system board.
- Lift the power-adapter port along with its cable, off the palm-rest and keyboard assembly.
Data is not available for the Topic