Removing the display assembly
The following image indicates the location of the display assembly and provides a visual representation of the removal procedure.
![Image: Removing the display assembly 1](https://dl.dell.com/content/guides/public/Html/inspiron-7706-2n1-service-manual/images/GUID-8A54F575-A1ED-44FA-84CF-78B0F7449AC7-low.jpg)
![Image: Removing the display assembly 2](https://dl.dell.com/content/guides/public/Html/inspiron-7706-2n1-service-manual/images/GUID-35C66294-3CAB-4DD8-9DAB-F7C6D31E1C12-low.jpg)
![Image: Display assembly](https://dl.dell.com/content/guides/public/Html/inspiron-7706-2n1-service-manual/images/GUID-0A6DD8E3-8E68-458C-83DB-5E1D57CA823F-low.jpg)
- Peel the tape that secures the display cable to the system board.
- Open the latch, and disconnect the display cable from the system board.
- Remove the three screws (M2.5x4.5) that secure the left-display hinge to the palm-rest and keyboard assembly.
- Remove the three screws (M2.5x4.5) that secure the right-display hinge to the palm-rest and keyboard assembly.
- Lift at an angle and slide the display assembly off the palm-rest and keyboard assembly.
Data is not available for the Topic