Procedure
- Disconnect the power-adapter port cable from the system board.
- Disconnect the speaker cable from the system board.
- Open the latch and disconnect the keyboard from the system board.
- Open the latch and disconnect the keyboard back-light cable from
the system board.
- Open the latch and disconnect the touchpad cable from the system
board.
- Open the latch and disconnect the hard-drive cable from the system
board.
- Open the latch and disconnect the I/O board cable from the system
board.
- Open the latch and disconnect the finger-print reader cable from
the system board.
- Open the latch and disconnect the power-button board cable from the
system board.
- Remove the three screws (M2.5x5) that secure the right hinge to the
system board.
- Open the right hinge.
- Remove the screw (M2x4) that secures the system board to palm rest
and keyboard assembly.
- Lift the system board off the palm rest and keyboard assembly.
Data is not available for the Topic