Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Inspiron 7506 2-in-1 Silver Service Manual

PDF

Removing the I/O board

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.
  3. Remove the fan.

About this task

The following image indicates the location of the I/O-board and provides a visual representation of the removal procedure.

Image: Removing the I/O board

Steps

  1. Remove the two screws (M2x3.5) that secure the left-display hinge to the I/O board and palm-rest and keyboard assembly.
  2. Remove the screw (M2.5x5) that secures the left-display hinge to the I/O board and plam-rest and keyboard assembly.
  3. Open the left-display hinge at an angle of 90 degrees.
  4. Peel the tape that secures the I/O-board cable to the I/O board.
  5. Open the latch, and disconnect the I/O-board cable from the I/O board.
  6. Open the latch, and disconnect the fingerprint reader-cable from the I/O board.
  7. Disconnect the coin-cell battery cable from the I/O board.
  8. Remove the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
  9. Slide and lift the I/O board off the palm-rest and keyboard assembly.
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\