Installing the fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the fan and provides a visual representation of the installation procedure.
![Image: Installing the fan](https://dl.dell.com/content/guides/public/Html/inspiron-7506-2n1-silver-service-manual/images/GUID-B673CD83-E23C-47A5-A3D9-5D24F66F3B14-low.jpg)
Steps
- Using the alignment posts, place the fan on the palm-rest and keyboard assembly.
- Replace the two screws (M2x2) that secure the system fan to the palm-rest and keyboard assembly.
- Connect the fan cable to the system board.
Data is not available for the Topic