Installing the wireless card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the wireless card and provides a visual representation of the installation procedure.
Steps
- Connect the antenna cables to the wireless card and route the antenna cables through the routing guides on the palm-rest and keyboard assembly.
The following table provides the antenna-cable color scheme for the wireless card that is supported by your computer.
Table 1. Antenna-cable color schemeThe following table provides the antenna-cable color scheme.
Connectors on the wireless card
| Antenna-cable color
|
---|
Main (white triangle)
| White
|
Auxiliary (black triangle)
| Black
|
- Align the notch on the wireless card with the tab on the wireless-card slot and insert the wireless card at an angle into the wireless-card slot.
- Align the screw hole on the wireless-card bracket with the screw hole on the wireless card and palm-rest and keyboard assembly.
- Replace the screw (M2x3) that secures the wireless-card bracket to the wireless card and system board.
Data is not available for the Topic