Removing the power-adapter port
About this task
The following image indicates the location of the power-adapter port and provides a visual representation of the removal procedure.
![Image: Removing the power-adapter port](https://dl.dell.com/topics/inspiron-7500-2n1-silver-service-manual/images/GUID-F197364D-A6BD-46B9-81B6-FBBF49B69B2D-low.jpg)
Steps
- Remove the two screws (M2x3.5) that secure the right display-hinge to the system board and palm-rest and keyboard assembly.
- Remove the screw (M2.5x5) that secures the right display-hinge to the system board and palm-rest and keyboard assembly.
- Open the right display-hinge at an angle of 90 degrees.
- Disconnect the power-adapter port cable from the system board.
- Remove the power-adapter port cable from the routing guide on the palm-rest and keyboard assembly.
- Remove the screw (M2x3) that secures the power-adapter port to the palm-rest and keyboard assembly.
- Lift the power-adapter port along with its cable, off the palm-rest and keyboard assembly.
Data is not available for the Topic