Inspiron 7500 2n1 Silver Service Manual

PDF

Installing the memory modules

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the memory modules and provides a visual representation of the installation procedure.

Image: Installing the memory modules

Steps

Lift the flap to access the memory-module slot.
Align the notch on the memory module with the tab on the memory-module slot.
Slide the memory module firmly at an angle, into the memory-module slot.
Press the memory module down until it clicks into place.
NOTE If you do not hear the click, remove the memory module and reinstall it.
NOTE Repeat step 2 to step 4 to install any other memory modules in your computer.

Next steps

Install the base cover.
Follow the procedure in After working inside your computer.